Our expert installation teams ensure excellent coverage using our wide range of robust and durable high friction surface applications, both hot and cold applied systems are designed for heavily trafficked surfaces.
Contact us now

Materials » High Friction / Coloured Surfacing
Our expert installation teams ensure excellent coverage using our wide range of robust and durable high friction surface applications, both hot and cold applied systems are designed for heavily trafficked surfaces.
Techgrip RTT1 is a BBA/HAPAS certified superior quality thermoplastic resin based high friction surfacing system. It is a type 1 HAPAS/BBA approved system incorporating graded calcined bauxite aggregate. Available in various colours including buff, grey, red, and green.
BENEFITS
– Excellent coverage.
– Application not seasonally affected.
– Minimal curing time.
– Can be trafficked within 30 minutes.
– Coloured to suit requirements.
– Will regulate minor surface irregularities.
– Excellent wearing qualities.
– Superior ride quality.
– Easy to apply.
Duragrip is a 2-component epoxy resin based high friction surfacing system. This system has been developed for application to road surfaces in combination with calcined bauxite to form a hard-wearing high-performance anti-skid road dressing. Also available in a Low Odour form.
BENEFITS
– Convenient mix ratio 1:1 by weight
– Excellent physical properties
– Resistant to oils and solvent spillages
APPLICATIONS
– Junctions & Pedestrian Crossings
– Roundabouts
– Sharp Bends
– Feeder and exit lanes
– Accident ‘black spots’
Note: New asphalt should be left for a minimum of four weeks, depending upon vehicle traffic. This is necessary to allow any volatile oils in the asphalt to oxidise. Duragrip may be applied to concrete surfaces with a suitable primer.
Duragrip PU is a 2-component polyurethane resin based high friction surfacing system. The system has been formulated to produce a coating for bonding aggregate to steel, asphalt and concrete for anti-skid, decorative and surface protection purposes. Duragrip PU is especially suitable for the coating of ship decks and bridges due to its flexibility and excellent adhesion to steel.
BENEFITS
– Convenient mix ratio (3:1).
– Excellent physical properties
– Resistant to oils and solvent spillages
APPLICATIONS
– Bridge decks
– Ship decks
– Junctions & Pedestrian Crossings
– Roundabouts
– Sharp Bends
– Feeder and exit lanes
– Accident ‘black spots’
Note:
New asphalt should be left for a minimum of four weeks, depending upon vehicle traffic. This is necessary to allow any volatile oils in the asphalt to oxidise. Duragrip PU may be applied to porous surfaces with a suitable primer.
Techgrip CL is a coloured thermoplastic surface treatment specially formulated to give excellent ride quality on all cycle routes, bus lanes, gateways, stop boxes and lay-bys. Fast cooling to reduce traffic disruption. Available in various colours including red and green.
BENEFITS
– Economical.
– Application not seasonally affected.
– Minimal curing time.
– Can be trafficked within 30 minutes.
– Coloured to suit requirements.
– Will regulate minor surface irregularities.
– Excellent wearing qualities.
– Superior ride quality.